Loading ...
Loading ...
Loading ...
47
801710
TROUBLESHOOTING TABLE
Problem/error Cause What to do?
The machine will not
start.
• The main switch is not
switched on.
• Check whether the main switch is on.
• There is no voltage in the
power outlet.
• Check the fuse.
• Check if the power cord plug is
correctly inserted into the power outlet.
There is voltage in
the outlet, but the
drum does not spin
and the appliance
does not work.
• Open the door. • Check if the door is closed properly.
• The condensate tank is full. • Empty the condensate tank
(see chapter »CLEANING AND
MAINTENANCE/Emptying the
condensate tank«).
• Perhaps the START DELAY
function was set.
• Programme was not started
in accordance with the
instructions.
• To cancel the start delay, press the
position (7) START DELAY and hold
for 3 seconds.
• Re-read the instructions for use again.
The appliance
stops heating
completely during a
programme.
• The net filter may be clogged.
As a result, the temperature
in the dryer rises, which in
turn causes overheating, and
therefore heating is switched
off.
• Clean the net filter (see chapter
»CLEANING AND MAINTENANCE/
Cleaning the net filter in the door«).
• Wait for the appliance to cool down,
and try running it again. If the dryer still
fails to start, call a service technician.
A slight hitting noise
appears.
• If the dryer is out of use for
a long period of time, the
support elements are under
stress at the same point.
• The noise will subside without any
intervention.
The door opens
during drying.
• Excessive load on the door
(too much laundry in the
drum).
• Reduce the amount of laundry.
Unevenly dried
laundry.
• Laundry of varying types
and thickness, or excessive
amount of laundry.
• Make sure you have sorted the laundry
by type and thickness, whether you
have added a suitable amount of
laundry to the drum, and whether you
have selected a suitable programme
(see PROGRAMME TABLE).
Loading ...
Loading ...
Loading ...