Loading ...
Loading ...
Loading ...
Service Station Procedures
Opening the Hood
1. Shift to Park or Neutral and set
the parking brake. Pull the hood
release handle, located under the
left lower corner of the dash-
board. The hood will pop up
slightly.
2. Standing in front of the car, put
your fingers under the front edge
of the hood to the right of center.
Slide your hand to the left until
you feel the hood latch handle.
Push this handle to the left until
it releases
the hood
. Lift the hood.
3. Pull the support rod out of its clip
and insert
the end into the hole
on the left side of the hood.
To close the hood, lift it up slightly
to remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot above the fender, then
let it drop.
Before Driving
HOOD RELEASE HANDLE
LATCH
CLIP
SUPPORT ROD
CONTINUED
Main Menu
Table of Contents
▲
▼
Loading ...
Loading ...
Loading ...