User Manual - Page 35

For PRELUDE 1993.

Loading ...
Loading ...
Loading ...
Indicator Lights
Brake Lamp
Indicator
This light normally comes on for a
few seconds when you turn the
ignition switch ON (II). If this light
comes on at any other time, it
indicates a brake light does not
work.
A burned out brake light is a
hazard when drivers behind you
cannot tell you are braking. Have
your brake lights repaired right
away.
Four Wheel Steering
System (4WS)
Indicator
Only on cars equipped with electronic
four wheel steering
This light normally comes on when
you turn the ignition ON (II) and
goes off after the engine starts. If it
comes on at any other time, there is
a problem in the 4WS. If this
happens, stop the car in a safe place
and turn off the engine. Reset the
system by restarting the engine.
Watch the 4WS light. If it does not
go off, or comes back on again
while driving, take the car to your
dealer to have the system checked.
The 4WS system is disabled with
this light on. The rear wheels are
locked straight ahead, and your car
steers like a conventional car
without 4WS.
Turn Signal and
Hazard
Warning
Indicators
The left or right turn signal light
blinks when you signal a lane
change or turn. If the light does not
blink or blinks rapidly, it usually
means one of the turn signal bulbs
is burned out (see page 164).
Replace the bulb as soon as possible,
since other drivers cannot see that
you are signalling.
When you turn on the Hazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the car should flash.
High Beam Indicator
This light comes on with the high
beam headlights. See page 40 for
information on the headlight
controls.
Instruments and Controls
BRAKE LAMP
4WS
Main Menu
Table of Contents
â–²
â–¼
Loading ...
Loading ...
Loading ...