Loading ...
Loading ...
Loading ...
Cooling System
4. Remove the reserve tank from
its holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
5. When the coolant stops draining,
tighten the drain plug in the
bottom of the radiator. Apply
non-hardening sealant to the
drain bolt threads and reinstall
the bolt in the engine block.
Tighten it securely.
6. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
With manual transmission:
(US: S, Canada: S)
3.5 l (0.92 US gal, 0.77 Imp gal)
(US: Si, Si 4WS, Canada: SR, SR 4WS)
3.8 l
(1.00 US gal, 0.84 Imp gal)
(US: VTEC, Canada: SR-V)
4.0 l (1.06 US gal, 0.88 Imp gal)
With automatic transmission:
(US: S, Canada: S)
3.4 l (0.90 US gal, 0.75 Imp gal)
(US: Si, Si 4WS, Canada: SR, SR 4WS)
3.7 l
(0.98 US gal, 0.81 Imp gal)
7. Pour coolant into the radiator up
to the base of the filler neck.
Maintenance
RESERVE TANK
RESERVE
TANK CAP
HOLDER
FILLER NECK
Fill up to here
Main Menu
Table of Contents
â–²
â–¼
Loading ...
Loading ...
Loading ...