Loading ...
Loading ...
Loading ...
Lights
5. Push the bulb holder into the side
marker assembly and turn it
clockwise until it locks.
6. Test the side marker to make
sure the new bulb is working.
7. Put the side marker assembly
into the bumper. Make sure the
tab on the side marker assembly
fits into the bumper slot. Tighten
the mounting screw.
Replacing a Front Turn
Signal Light Bulb
1. Use a Phillips-head screwdriver
to loosen the turn signal assem-
bly's mounting screw.
2. Remove the turn signal assembly
from the bumper.
3. Remove the bulb holder from the
turn signal assembly by turning
it counterclockwise.
4. Remove the burned out bulb
from the socket by pushing it in
and turning counterclockwise
until it unlocks.
Install the new bulb.
Maintenance
BULB
BULB HOLDER
SCREW
CONTINUED
TURN SIGNAL ASSEMBLY
Main Menu
Table of Contents
▲
▼
Loading ...
Loading ...
Loading ...