Loading ...
Loading ...
Loading ...
Installation
29
Height adjustment
Adjusting screws in the brackets
located at the top of the appliance are
used for aligning the appliance with
adjoining furniture units.
Turning the screws anti-clockwise
raises the appliance and clockwise
lowers it.
You may also have to adjust the
depth again.
Connecting to adjacent
furniture units/fitting side
panels
The rangehood is supplied with two
screws on each side for securing it to
adjacent furniture units or for fitting side
panels.
Remove the vapour canopy.
Remove the grease filters.
Turn the top screws in the adjacent
furniture units or side panels.
Remove the cover caps from the
lower screws.
Screw in the lower screws.
Refit the caps.
Refit the vapour canopy.
Loading ...
Loading ...
Loading ...