Loading ...
Loading ...
Loading ...
Installation
27
Depth adjustment
There are two adjustable brackets at
the top of the unit and an adjustable
trim at the bottom of the unit for setting
the unit depth T between 275mm and
360mm.
Loosen the screws in the adjustable
brackets.
Extend the brackets to dimension T.
Tighten up the screws.
Loosen the screws in the adjustable
trim.
Adjust the trim to the required depth.
Tighten up the screws.
If the adjustable trim is too short,
unscrew it, turn it around and refit it
to use the longer side.
Wall installation
The rangehood is fitted to the wall
between two wall units. Screws and
plugs are supplied for this.
Cut the drilling template to size and
position against the wall. The top
edge of the template indicates the
top edge of the rangehood. Please
refer to the safety distances (S) to the
cooktop in "Installation".
Mark and drill the four holes for the
mounting brackets (8mm).
Remove the drilling template.
Secure the fixing brackets to the wall
using the plugs and screws supplied.
The screws and plugs are designed
for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is able to take the
weight of the rangehood.
Attach the corresponding drilling
template to the adjacent cabinet or
the side panel.
Loading ...
Loading ...
Loading ...