Loading ...
Loading ...
Loading ...
Installation
28
Drill two holes into the adjacent
cabinet or the side panel (2mm).
Remove the recirculation grille for
extraction mode.
Hang the rangehood into position
using the adjustable brackets.
Attach the vapour canopy with
furniture door fitted and then close it.
It is possible to adjust the movement
of the vapour canopy. This may be
required if a heavy furniture door is to
be fitted, for example.
Remove the two cover caps which
conceal the adjusting screws at the
front right and left on the lower edge
of the appliance.
Adjust the screws evenly on both
sides using a Phillips-head
screwdriver. Turn clockwise to tighten
the mechanism and anti-clockwise to
loosen the mechanism.
Refit the caps.
Loading ...
Loading ...
Loading ...