Loading ...
Loading ...
Loading ...
Cleaning and care
18
Before proceeding with any
maintenance or cleaning task, the
rangehood must be disconnected
from the power supply (see "Warning
and Safety instructions").
Housing
Removing the canopy
The vapour canopy can be taken off for
better accessibility.
Open the vapour canopy.
Pull the catch downwards to unlock
the vapour canopy and then swing
the canopy forwards.
To refit the canopy, fit it back into the
guides at the top and then swing the
canopy back down.
General
The surfaces and controls are
susceptible to scratches and
abrasion.
Please observe the following
cleaning instructions.
All external surfaces and controls can
be cleaned using warm water with a
small amount of washing-up liquid
applied with a well wrung-out soft
sponge or cloth.
Do not use too much water when
cleaning the controls.
Water could penetrate into the
electronics and cause damage.
After cleaning, wipe the surfaces dry
using a soft cloth.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents. These will damage
the surface material.
Loading ...
Loading ...
Loading ...