Loading ...
Loading ...
Loading ...
45
[1] Playing sources recorded in Dolby Surround in the Home THX Cinema surround mode
1
q Select the program source.
INPUT SELECTOR
(Main unit) (Remote control unit)
3
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
THX Surround EX / Home THX Cinema mode
When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal that is played:
q THX Surround EX
w Home THX CINEMA
e THX 5.1
r THX DSCRT 6.1, THX MTRX 6.1
When the HOME THX CINEMA mode is set when a DVD is played, check the DVD player’s digital output setting and change the setting to one
for which Dolby Digital and DTS bit stream signals can be output (“bit stream”, for example).
2 1-w
1-q
4
1-q
1-w
2
4
w Set the input mode to “AUTO”.
INPUT MODE
(Main unit) (Remote control unit)
2
Select the Home THX mode.
HOME
THX CINEMA
(Main unit) (Remote control unit)
4
Adjust the volume.
MASTER VOLUME
(Main unit) (Remote control unit)
Surround parameters q
DECODER:
Select the decoder to be used when playing 2-channel sources in the Home THX Cinema mode.
PL II C .........The signals are decoded in the Dolby Pro Logic II Cinema mode before undergoing THX processing.
PL II E .........The signals are decoded in the Dolby Pro Logic emulation mode before undergoing THX processing.
NEO:6 C......The signals are decoded in the NEO:6 Cinema mode before undergoing THX processing.
AFDM (Auto Flag Detect Mode):
Select the Auto Flag Detect Mode. (See page 22.)
SB CH OUT:
When Auto Flag Detect Mode is set to “OFF”, the reproduction method of a surround back channel can be chosen.
The parameter which can be chosen is equivalent to the contents of a setting of Non Flag Source SBch Output (see page 22).
When Auto Flag Detect Mode is set to “ON”, the parameter selected by Non Flag Source SBch Output of Setup Menu is displayed (see page
22).
When you change a parameter, please set Auto Flag Detect Mode to OFF.
Loading ...
Loading ...
Loading ...