Loading ...
Loading ...
Loading ...
37
[3] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)
1
Press the REC/MULTI button until “M-
ZONE SOURCE” appears on the set’s
display.
REC / MULTI
1, 4 2
(Main unit)
VCR -1 -2 -3 V.AUX MD / TAPE
PHONO CD TUNER DVD / VDP TV / DBS
2
Display
2
Select the source you want to record
appears on the set’s display.
• The MULTI indicator lights.
• The indicator for the selected
program source light.
• When the AVR-4802 is in the REC
OUT mode, the source cannot be
output using the M-ZONE 1 buttons
on the remote control unit.
SELECT
(Main unit)
3
Start playing the source to be output.
• For operating instructions, refer to the manuals of the
respective components.
NOTES:
• The signals of the source selected in the Multi mode are also
output from the TAPE and VCR recording output terminals.
• Digital signals are not output from the MULTI ZONE audio
output jacks.
When “Multi” is selected for the system setup’s multi-zone setting,
the source selected here is output from the SB/MULTI speaker
terminals.
The volume can be adjusted and the input source can be selected
using the VOLUME UP and VOLUME DOWN buttons on the remote
control unit’s “M-ZONE 1” page.
4
To cancel, press the REC/MULTI button
and select “SOURCE”.
REC / MULTI
(Main unit)
Loading ...
Loading ...
Loading ...