Loading ...
Loading ...
Loading ...
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
73
Water intake
The washing machine can be con-
nected to a portable water supply. A
non-return valve is not needed unless
required by building code.
The washing machine has ½“ (13mm)
pressure hoses with ¾” (19mm) female
hose thread connections. If there is no
water hookup, contact a plumber to in-
stall a connection. Make sure that the
sealing ring is seated properly on the
hose connector.
Replace the hose only with a genuine
Miele hose, or with a hose able to with-
stand up to 145 psi (10.000kPa) pres-
sure. The water valve connector must
also be able to withstand 145 psi
(10.000kPa).
The bolted connection is under water
pressure. Open the water supply
slowly to check for leaks. Adjust the
rubber seal and the bolted connec-
tion if necessary.
Maintenance
Only use a genuine Miele hose that has
been tested to withstand pressure of at
least 1,015psi (7,000kPa) should you
ever need a replacement.
A filter is located in the open end
of the inlet hose and another in the
intake point to protect the inlet valve.
Neither filter may be removed.
Loading ...
Loading ...
Loading ...