Loading ...
Loading ...
Loading ...
4. Selecting program settings
25
Level of soiling
You can specify the level of soiling of
the load.
– Light
No visible soiling or stains
– Normal
Visible soiling and/or a small number
of light stains visible
– Heavy
Soiling and/or stains clearly visible. A
pre-wash is automatically carried out
The following parameters will change,
depending on the level of soiling se-
lected:
– With the Heavy level of soiling set-
ting, a pre-wash will be carried out
automatically (see “Options”).
– The adjustment of the rinse water
level
Delay start/SmartStart
Delay start
With the delay start function, you can
delay the start of the program.
This function is active when the set-
ting SmartGrid is switched off.
The hours can be set in the values from
00 to 24. The minutes can be set in 15-
minute increments from 00 to 45.
Setting the delay start time
Touch the sensor button.
The following will appear in the display:
Start in
OK
h:0000
Set the hours with the sensor
buttons. Confirm with the OK sensor
button.
The display will change:
Start in
OK
h0006:
Set the minutes with the sensor
buttons. Confirm with the OK sensor
button.
Tip: The values will count upwards and
downwards automatically if you keep
your finger on the sensor buttons.
Changing delay start
The selected delay start time can be
changed before the program start.
Touch the sensor button.
If desired, change the specified time
and confirm with the OK sensor but-
ton.
Loading ...
Loading ...
Loading ...