Loading ...
Loading ...
Loading ...
Install Handle Assembly
1. Slide handle assembly and collar onto the work arm assembly. Tighten set screws in the collar using a 4mm Allen
wrench.
NOTE: Make sure set screws face away from the user when collar is installed.
Item Description Qty.
1 Handle Assembly 1
2 Work Arm Assembly 1
3 Collar 1
Tighten hardware to 8-10 (10.8-13.5 Nm).
NOTE: Make sure handle on the handle assembly is aligned between the two bumpers on the work arm assembly.
Item Description Qty.
1 Handle 1
2 Bumper 2
2. Install screws and washers securing the counter weight to the work arm assembly using an 8mm Allen wrench.
Item Description Qty.
1 Counter Weight 1
2 Work Arm Assembly 1
3 Washer, Flat 3/8" 2
4 Screw, M10 x 1.5, 25mm 2
Tighten hardware to 14-16 (19-21.7 Nm).
Page 27 of 40
Loading ...
Loading ...
Loading ...