Loading ...
Loading ...
Loading ...
17. Install bearing housing cap to the end support assembly using a rubber mallet.
Item Description Qty.
1 Bearing Housing Cap 1
2 End Support Assembly 1
18. Install bearing housing cap to the pad mount assembly using a rubber mallet.
Item Description Qty.
1 Bearing Housing Cap 1
2 Pad Mount Assembly 1
Cable Routing
1. Route cable from the lower pulley assembly up through the floating pulley assembly.
2. Thread cable end through the jam nut and into the rod end bearing a minimum of 12mm.
Item Description Qty.
1 Rod End Bearing 1
2 Nut, M10, Hex Jam 1
3 Cable, 116.3" (2955mm) 1
Page 25 of 40
Loading ...
Loading ...
Loading ...