Loading ...
Loading ...
Loading ...
Tools Required
• 7/16" Wrench
• 10 mm Wrench
• 17 mm Wrench
• 24 mm Wrench
• 7 mm Allen wrench
• 8 mm Allen wrench
• Torque wrench
• 10 mm Socket wrench
• 10 mm Ratchet wrench
• Crescent wrench
• Phillips screwdriver
• Rubber mallet
Assembly Procedure
Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is damage, see the
Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
Assemble Frame Components
1. Install screws, washers, and locknuts securing the stability bracket and the bottom cross brace to the tower frame using an 8mm
Allen wrench and 17mm wrench.
Item Description Qty.
1 Bottom Cross Brace 1
2 Tower Frame 1
3 Stability Bracket 1
4 Screw, M10 x 1.5, 110mm 1
5 Screw, M10 x 1.5, 120mm 1
6 Washer, Flat 3/8" 4
7 Nut, M10 x 1.5, Hex Nylock 2
8 Hole Plug, ½" 2
Tighten hardware to 20-25 (27.1-33.9 Nm).
Page 11 of 40
Loading ...
Loading ...
Loading ...