Loading ...
Loading ...
Loading ...
3. Install screw, washers, and locknut securing the bushings and rod end bearing to the lower pulley assembly using an 8mm Allen
wrench and 17mm wrench.
Item Description Qty.
1 Rod End Bearing 1
2 Bushing, .235" 2
3 Screw, M10 x 1.5, 50 mm 1
4 Washer, Flat 3/8" 2
5 Nut, M10 x 1.5, Hex Nylock 1
Tighten hardware to 20-25 (27.1-33.9 Nm).
Cable Routing View
Page 26 of 40
Loading ...
Loading ...
Loading ...