Loading ...
Loading ...
Loading ...
20. Slide the carriage bolt to the end of the slot in the lower pulley assembly using a 17mm wrench.
Item Description Qty.
1 Carriage Bolt, M10 x 1.5, 50mm 1
Tighten hardware to 20-25 (27.1-33.9 Nm).
21. Install screws and washers securing the lower pulley assembly to the tower frame using an 8mm Allen wrench.
Item Description Qty.
1 Lower Pulley Assembly 1
2 Tower Frame 1
3 Washer, Flat 3/8" 4
4 Screw, M10 x 1.5, 25mm 4
Tighten hardware to 20 (27.1 Nm).
Install Work Arm Assembly
1. Install screws and washers securing the pivot support assembly to the tower frame using an 8mm Allen wrench.
Item Description Qty.
1 Pivot Support Assembly 1
2 Tower Frame 1
3 Screw, M10 x 1.5, 25mm 4
4 Washer, Flat 3/8" 4
Loosely hand tighten hardware.
Page 19 of 40
Loading ...
Loading ...
Loading ...