Operation Manual - Page 52

For AVIC-W8600NEX. Also, The document are for others Pioneer models: AVIC-W6600NEX

Loading ...
Loading ...
Loading ...
English
- 52 -
Menu Item Description
[Vehicle] Set the type of vehicle you will be using on the route.
NOTES
The route is planned based on the selected vehicle type.
To enhance the route accuracy, correctly select a vehicle type
that is similar to the condition of your vehicle.
TIPS
To edit the name and estimated maximum speed of the selected
vehicle profile, touch .
To add a new vehicle profile, touch [Add Profile]. Then select one
of the vehicle types and set the name and estimated maximum
speed.
[Car] Maneuver restrictions and directional constraints are
taken into account when planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only if they
are inevitable to reach the destination.
[Emergency] All maneuvers available at intersections are taken into
account.
Directional constraints are taken into account in the same
way as travel in the opposite direction is allowed at low
speeds.
Only private roads that need to be used to access the
destination are included.
Walkways are excluded from routes.
[Bus] Maneuver restrictions and directional constraints are
taken into account when planning a route.
Roads are used only if access for buses is allowed.
Private roads, resident-only roads and walkways are
excluded from routes.
[Taxi] Maneuver restrictions and directional constraints are
taken into account when planning a route.
Roads are used only if access for taxis is allowed.
Private roads, resident-only roads and walkways are
excluded from routes.
[Truck] Maneuver restrictions and directional constraints are
taken into account when planning a route.
Only roads that allow truck access are included.
Private roads, resident-only roads and walkways are
excluded from routes.
U-turns are not used in routes (turning around on a
divided road is not considered a U-turn for the purpose of
this system).
Loading ...
Loading ...
Loading ...