Sample Code Strings
Below are representative samples of code strings for the VPL-VW100. They can be used together with the
Protocol Manual to help insure that the correct protocol is being implemented in writing the strings. Included
are samples for Power ON and OFF and input selection commands, as well as additional information such as
Check Sum calculation and Port settings.
NOTE: Check Sum is arrived at by adding together bits 2-5 using OR
function.
： Start Code / End Code
Power ON
： Command Category
Sample A9 17 2E 00 00 00 3F 9A
0xA9,0x17,0x2E,0x00,0x00,0x00,0x3F,0x9A
： Data
Hex strings can be verified in Terminal program issued as numbers, not
ASCII, see above.
： Check Sum
Port setting is 38400, Parity even, stop bits 1, Hardware Flow control none,
send Hex bits
Power ON
Sample
A9 17 2E 00 00 00 3F 9A
Power OFF
Sample
A9 17 2F 00 00 00 3F 9A
Picture Mute ON
Sample
A9 00 30 00 00 01 31 9A
Red indicates verified string
Picture Mute OFF Send as numbers
Sample
A9 00 30 00 00 00 30 9A
Input Video Input DVI
Sample
A9 17 2A 00 00 00 3F 9A Sample A9 00 01 00 00 05 05 9A
Input SVideo
Sample
A9 17 5F 00 00 00 5F 9A
Input A
Sample
A9 17 2B 00 00 00 3F 9A
Input Component Input HDMI
Sample
A9 17 2c 00 00 00 3f 9A Sample A9 00 01 00 00 04 05 9A
Loading ...
