Loading ...
Loading ...
Loading ...
11
For optimum performance and enjoyment, your MDA should
be appropriately set up. If you’re using a subwoofer or sub-
woofers, ARC (Anthem Room Correction) sets crossovers and
levels for a perfect blend with the main speakers. The rest of
the settings mostly relate to your preferences. Please fully
congure all zones with the proper output modes (single-end-
ed, stereo or mono bridge), speaker prole and subwoofer
settings (present or not, active or passive) before running ARC.
2.1 ACCESSING THE USER INTERFACE
For initial setup, the MDA should be connected to a network
and plugged into the wall with the On Mode switch set to Auto.
Turn on the MDA by setting the master power switch to On.
The Power light on the front panel indicates that the MDA has
powered up. Once the LAN light on the front panel turns blue
or red, the MDA has connected to your network and acquired
a network address.
2.2 FINDING THE MDA’S IP ADDRESS
The MDA is congured using an interface accessed using a
web browser. Identify the MDA’s IP address to proceed.
You can discover the MDA’s IP address using the ARC Gene-
sis software. Start the ARC program on a PC or Mac, choose
Launch ARC, and hover your mouse cursor over the MDA, wait
for a second, and it shows the IP address in the device discov-
ery screen.
We also recommend using Fing, a free network device detec-
tion app available on iOS, Android, and Windows. This app
identies devices on a network and shows their IP addresses.
These identify with MDA8 or MDA16 or MartinLogan.
To access the MDA’s conguration interface, open a web
browser (we recommend Chrome or Safari), type the IP ad-
dress into the browser’s address bar, and hit enter.
2.3 IDENTIFYING MULTIPLE MDAs
When installing more than one MDA, there are multiple IP ad-
dresses. To identify each MDA, use a web browser to connect
to the rst one and set General > Preferences > Unit ID to On.
The ID light on the MDA’s back panel and the Power indicator
on the front ash. The MAC Address displayed under General
> Information also matches the unique MAC Address printed
on the back of the MDA. Note that the last few characters of
the factory default unit’s name correspond to the end of the
MAC address printed at the back of the MDA.
2. THE USER INTERFACE
Loading ...
Loading ...
Loading ...