Loading ...
Loading ...
Loading ...
16
FS3.0 Elliptical
1. Wipe down all areas in the sweat path with a damp cloth after each workout.
2. If a squeak, thump, clicking or rough feeling develops, the main cause is most likely because the
hardware was not sufciently tightened during assembly. All bolts that were installed during assembly need
to be tightened as much as possible. It may be necessary to use a larger wrench than the one provided if
you cannot tighten the bolts sufciently. The majority of calls to the service department for noise issues can
be traced to loose hardware or the rear rails being dirty.
3. If squeaks or other noises persist, check that the unit is properly leveled before calling the service
department.
General Maintenance
Your new elliptical is engineered and manufactured to the strictest industry standards and tolerances. All ellipti-
cal trainers, no matter who the manufacturer, have a multitude of moving linkages and parts. Be aware that even
with the tightest mechanical tolerances there still could be a slight amount of play between some parts. This
inherent play can result in slight noises during use such as clicks and small thumps. Please expect that the
elliptical will not be completely silent.
Elliptical Noises
Loading ...
Loading ...