Loading ...
Loading ...
Loading ...
Step 14: Connecting the electrical power
Turn off the electricity to the dishwasher’s electrical circuit. Skip this step if
your dishwasher is equipped with a power cord. Make sure that the electrical
power is turned off at the source.
1. Remove the junction box cover from the power supply junction box on the wall.
2. Locate the three dishwasher wires, (white, black, and green) with stripped ends,
then insert the dishwasher wires through the small hole in the junction box.
3. Secure the house wiring to the bottom of the junction box with a strain relief
fitting.
4. Use wire nuts to connect incoming ground to green, white to white, and black to
black.
5. Replace the junction box cover. Make sure that no wires are pinched under the
cover.
Use Philips screwdriver, strain relief (for electrical connections), and wire nuts (UL
listed).
Page 18
Loading ...
Loading ...
Loading ...