Loading ...
Loading ...
Loading ...
Step 12: Connecting the water supply line
1. Slide the compression nut, then the ferrule over the end of the water supply
line. 2. Insert the water supply line into the 90° elbow.
3. Slide the ferrule against the 90° elbow and secure it with the compression nut.
IMPORTANT: Make sure that the door spring does not rub or contact the water
supply line or drain hose. Test by opening and closing the door. Reroute the
lines if interference occurs.
Use adjustable wrench, waterline kit, and Teflon thread seal tape.
Step 13: Connecting the drain hose
IMPORTANT: Follow all local codes and ordinances.
1. Cut on the marked line as required for your installation. The drain hose’s
molded end will fit 5/8”, 3/4” or 1" diameter connections on the air gap, waste tee,
or garbage disposal.
Page 17
Loading ...
Loading ...
Loading ...