Loading ...
Loading ...
Loading ...
Step 6: Install the drain hose
1. Turn the dishwasher upright.
2. Slide a screw-type hose clamp onto the
drain hose.
3. Install the drain hose to the dishwasher
drain outlet on the back of the dishwasher,
then tighten the screw-type hose clamp.
Use Philips screwdriver, screw-type hose
clamps, and drain hose.
Step 7: Inserting the drain hose
through the cabinet
Insert the drain hose into the hole in
the cabinet wall. If a power cord is
used, guide the end through a
separate hole.
Tip: Position the water line and house
wiring on the floor to avoid interfering
with the base of the dishwasher.
Step 8: Slide the dishwasher partially into the cabinet
Caution: Do not push against the front panel with your knees. Damage will occur.
1. Position the dishwasher in front of the opening, then slide the dishwasher into the
opening a few inches at a time.
2. Pull the drain hose through the opening under the sink as you proceed. Stop when
the dishwasher is a few inches in front of the adjacent cabinetry.
3. Make sure that the drain hose is not kinked under the dishwasher and that there is
no interference with the water line, wiring, or any other component.
Page 14
Loading ...
Loading ...
Loading ...