Loading ...
Loading ...
Loading ...
Servicing Your Honda 85
Suspension
5. Pour the recommended fork oil (page 84) into
the outer tube.
Optional Softer 22.38 lbf/in (3.92 N/mm) Fork Spring
Standard oil
capacity
11.8 US oz
(350 cm
3
)
Maximum oil
capacity
13.7 US oz
(404 cm
3
)
Slightly stiffer as
it nears full
compression.
Slightly softer as
it nears full
compression.
Minimum oil
capacity
10.4 US oz
(308 cm
3
)
Optional Stiffer 24.61 lbf/in (4.31 N/mm) Fork Spring
Standard oil
capacity
11.8 US oz
(348 cm
3
)
Maximum oil
capacity
13.6 US oz
(402 cm
3
)
Slightly stiffer as
it nears full
compression.
Slightly softer as
it nears full
compression.
Minimum oil
capacity
10.3 US oz
(306 cm
3
)
1 scribe mark
3 scribe marks
6. Check taht the O-ring (9) on the fork damper
(2) is in good condition. Apply the
recommended fork oil to the O-ring.
(1) outer tube (9) O-ring
(2) fork damper
7. Temporarily install the fork damper (2) to the
outer tube (1).
After installing the fork leg (page 117) tighten
the fork damper to the specified torque:
Actual:
25 lbf·ft (34 N·m, 3.5 kgf·m)
Torque wrench scale reading:
23 lbf·ft (31 N·m, 3.2 kgf·m), using a 20 in
(50 cm) long deflecting beam type torque
wrench.
When using the lock nut wrench, use a 20 in
(50 cm) long deflecting beam type torque
wrench. The lock nut wrench increases the
torque wrench’s leverage, so the torque
wrench reading will be less than the torque
actually applied to the fork damper.
(9)
(2)
(1)
Fork Oil Capacity:
Standard 23.53 lbf/in (4.12 N/mm) Fork Spring
or
Standard oil
capacity
11.7 US oz
(345 cm
3
)
Maximum oil
capacity
13.5 US oz
(399 cm
3
)
Slightly stiffer as
it nears full
compression.
Slightly softer as
it nears full
compression.
Minimum oil
capacity
10.2 US oz
(303 cm
3
)
2 scribe marks
(aftermarket parts)
No mark
(factory products)
Be sure the oil capacity is the same in both fork legs.
Loading ...
Loading ...
Loading ...