Loading ...
Loading ...
Loading ...
Front Suspension Adjustments
108 Adjustments for Competition
(5) headlight connector
4. Remove the handlebar pad.
Remove the handlebar holder nuts, washers,
mounting rubbers (6) and handlebar (7).
(8) upper pinch bolts
(9) fork damper
(10)
(11)
(10) disc cover
(11) bolts
8. Remove the tripmeter cable (12) and front
axle nut (13) and loosen the axle pinch bolts
(14) on both fork legs.
9. Pull the front axle shaft (15) out of the wheel
hub and remove the front wheel.
(12) tripmeter cable (14) axle pinch bolts
(13) front axle nut (15) front axle shaft
10.Remove the fork protector bolts (16),
tripmeter cable clamp bolts (17) and brake
hose clamp bolts (18) and fork protectors
(19).
Remove the brake caliper bolts (20) and brake
caliper (21).
The fork protector bolts and brake caliper
bolts have a locking agent applied.
(5)
(7)
(6)
(8)
(9)
(14)
(15)
(12)
(14)
(13)
(6) handlebar holder nuts/washers/mounting rubbers
(7) handlebar
5. Loosen the upper pinch bolts (8).
6. Loosen the fork dampers (9) using the lock
nut wrench but do not remove it yet.
• Lock nut wrench 07WMA-KZ30100
Do not use an adjustable wrench to loosen the
fork damper: it may damage them.
NOTICE
1. Place your CRF on the optional workstand or
equivalent support with the front wheel off the
ground.
2. Remove the front visor bolts (3) and front
visor (4).
(3)
(4)
(3) front visor bolts
(4) front visor
3. Disconnect the headlight connector (5).
7. Remove the disc cover (10) by removing the
bolts (11).
Keep the master cylinder upright to prevent air
from entering system.
NOTICE
Loading ...
Loading ...
Loading ...