Loading ...
Loading ...
Loading ...
Cleaning and maintenance
125
EN
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time.
1. After having selected the duration of the
pyrolytic cycle and having pressed the
symbol to confirm, press the
symbol.
2. Press function delayed.
3. Enter the required end of cooking time
(for example 19.30: first touch the hours
box, then the numbers 1 and 9; next,
touch the minutes box and then the
numbers 3 and 0).
4. Press the symbol to confirm.
5. The appliance waits for the set start time
to be reached and then starts the
cleaning cycle.
4.5 Extraordinary maintenance
Seal maintenance recommendations
The seals should be soft and flexible.
• To keep the seal clean, wash it using a
non-abrasive sponge and lukewarm
water.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
Live parts
Danger of electrocution
• Disconnect the oven power supply.
Live parts
Danger of electrocution
• Unplug the appliance from the power
supply.
Be careful not to scratch the enamel
on the side of the oven.
Loading ...
Loading ...
Loading ...