Loading ...
Loading ...
Loading ...
801514
58
Problem/
error
Indication on the display unit and
problem description
What to do?
cln System warning to run the Drum
Clean (Self-cleaning programme)
After the washing programme
is complete, the signs »cln« and
»End« will alternate on the display
unit.
We recommend running the Drum Clean (Self-
cleaning programme).
»PF« Power supply failure warning
(»PF«/Power Failure)
Washing process was interrupted due to power
supply failure.
To restart, press the (3) START/PAUSE button.
Unresponsive display unit and all
buttons
Manually (physically) stop the programme by
pressing the button (1) ON/OFF/RESET and hold
it for more than 3 seconds.
Unplug the power cord from the outlet; then, plug
the power cord back into the outlet and switch
on the washing machine.
If the error reoccurs, call a service technician.
Washing machine standing by,
ready to resume the washing
programme
The time remaining until
programme completion is
alternately lit and off on the display
unit .
To resume the washing program, press
the button (3) START/PAUSE, or manually
(physically) stop the programme and press the
button (1) ON/OFF/RESET and hold it for more
than 3 seconds.
Preparation for unlocking the
door
Signal lights will flash on the
display unit.
Wait until the process is completed. If no error
is indicated after the process, then a new
programme can be started.
Water has to be drained. Wait for the door to
unlock.
Unevenly distributed laundry or lumps of laundry in the washing machine drum can cause problems
such as vibration and noisy operation. The washing machine detects such problems and the UKS*
(*stability control system) will be activated.
Smaller loads (e.g. one towel, one sweater, one bathrobe etc.) or clothes made of materials with
special geometrical properties are virtually impossible to distribute evenly across the washing
machine drum (slippers, large items etc.). This results in several attempts to redistribute the laundry,
which in turn leads to longer programme duration. In extreme cases of unfavourable conditions, the
programme can be completed without the spinning cycle. The UKS* (*stability control system) allows
stable operation and a longer washing machine useful life.
If the problems persist despite observing the advice above, call an authorized service technician.
Loading ...
Loading ...
Loading ...