Loading ...
Loading ...
Loading ...
801514
47
INTERRUPTIONS AND CHANGING
THE PROGRAMME
MANUAL INTERRUPTION
To stop and cancel a washing programme, press the (1) ON/OFF/RESET button and hold it for
more than 3 seconds. Signal lights will flash on the display. At the same time, the washing machine
pumps the water out of the washing machine drum. When the water is pumped out, washing
machine door will be unlocked. If the water in the washing machine is hot, the washing machine will
automatically cool it and pump/drain it out.
PERSONAL SETTINGS
Basic or default settings for each washing programme can also be changed. When you select the
programme and additional functions, you may store such combination by pressing the (3) START/
PAUSE button and holding it for five seconds. S C will appear on the display.
The programme will remain stored until it is changed using the same procedure.
Personal settings can also be reset to factory settings in the user menu.
PERSONAL SETTINGS MENU
Switch on the washing machine by pressing the (1) ON/OFF/RESET button. To open the Personal
settings menu simultaneously press the positions (10) SPIN (SPINNING RATE/DRAIN/PUMP STOP)
and (13) EXTRA WATER (HIGH WATER LEVEL). Indicator lights for ECO WASH, QUICKER,
DOS ASSIST and ECO VIEW will light up on the display unit. Number 1 will appear on the LED
display, indicating the settings function. Rotate the programme selector knob (2) to the left or to the
right to choose the function to change.
Press on the TEMP. (WASHING TEMPERATURE) position to confirm the desired functions and
relevant settings. Press the position (7) PREWASH to go back one step. If the desired settings are
not selected in 20 seconds, the programme will automatically return to main menu.
Number 1 indicates Acoustic signal volume setting. Acoustic signal volume can be set at four
levels (0 means the sound is off; 1 means that the button sound is activated; 2 means low volume,
and 3 means high volume). Choose the volume level by rotating the programme selector knob (2) to
the left or to the right. The lowest setting means that the acoustic signal is switched off.
Number 2 indicates Water hardness setting. Water hardness can be set at three levels. To select
the water hardness level, rotate the program selector knob (2) to the left or to the right and choose
between soft (2:1), medium (2:2) and hard (2:3) water.
For correct functioning of the (5) DOS ASSIST function, we recommend setting the correct water
hardness level.
Number 3 indicates reset of Personal programme settings to factory defaults.
Loading ...
Loading ...
Loading ...