Loading ...
Loading ...
Loading ...
18
CHOICE OF INGREDIENTS FOR YOGURT
Milk
What milk should you use?
All our recipes (unless otherwise stipulated) are prepared using cow’s
milk. You can use plant milk such as soya milk for example as well as
sheep or goat’s milk but, in this case, the firmness of the yogurt may vary
depending on the milk used. Raw milk or long-life milks and all the milks
described below are suitable for your appliance:
Long-life sterilised milk: UHT whole milk results in firmer yogurt. Using
semi-skimmed milk will result in less firm yogurt. However, you can use
semi-skimmed milk and add one or two pots of powdered milk.
Pasteurised milk: this milk gives a more creamy yogurt with a little bit
of skin on the top.
Raw milk (farm milk): this must be boiled. It is also recommended to
let it boil for a long time. It would be dangerous to use this milk without
boiling it. You must then leave it to cool before using it in your appliance.
Culturing using yogurt prepared with raw milk is not recommended.
Powdered milk: using powdered milk will result in very creamy yogurt.
Follow the instructions on the manufacturer’s box.
Choose a whole milk, preferably long-life UHT.
Raw (fresh) or pasteurised milk must be boiled then cooled and needs
the skin removing.
YOGURT FUNCTION
Press «Menu» key to select function «Yogurt/Cheese». The screen
displays “P1” for Yogurt program, then the default cooking time
«08:00», , the light of «Start» will flash red.
Press «Temperature / Timer» key to activate the time setting function
and then press «<» and «>» to change the cooking time.
Press «Stir» key and the light of “Stir” lights up. Press again and the
“Stir” function will be off. If no action is done before starting the
cooking, the stirring function will be off. For this function, if the paddle
is activated, it will only stir during the last 15 min of the cooking time
in order to do mixed yogurt.
Press «Start» key. The multicooker will start the “Yogurt” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
Loading ...
Loading ...
Loading ...