Loading ...
Loading ...
Loading ...
23
Using your cooktop
The dual burner can be used as:
a small burner, with the flame only from the
inner crown.
as a high powered burner, with flames from both the inner and outer crowns.
To change from using the inner crown only to using both the inner and outer crowns together,
press the control knob down before turning it. You have to do the same when going from using
both crowns to using just the inner crown.
To use the inner crown, adjust the flame anywhere between the
and . Do not adjust the
flame between
and OFF.
To use the inner and outer crowns together, adjust the flame anywhere between the
and .
If the cooktop does not light
If the cooktop does not light, check that:
The cooker is switched on.
The gas is turned on.
You have held down the knob for at least 10 seconds.
The ignitors are sparking. If the ignitors are not sparking, they may be dirty or wet. Clean them
with a toothbrush and methylated spirits, as shown.
If the flame is irregular
If the flame is yellow or irregular, check that the burner parts, including the burner cap, are:
clean and dry.
positioned correctly. See ‘Care and cleaning’.
See also ‘Troubleshooting’.
Flame failure probe
Ignitor
Fig. 14 Cleaning the probe and ignitor
Loading ...
Loading ...
Loading ...