Loading ...
Loading ...
Loading ...
22
Using your cooktop
Before using your cooktop
Before using your new cooktop, please:
Read this user guide, taking special note of the ‘Safety and warnings’ section.
Make sure all controls are turned off.
Lighting the cooktop
1
Choose the control knob for the burner you want to use.
2
Press the knob down gently and turn it anticlockwise to the position. The ignitors on all the
burners will spark.
Hold down the knob for approximately 10 seconds after the burner has lit. Releasing the knob
too soon will extinguish the flame.
3
Adjust the flame anywhere between the and positions. Do not adjust the flame between
and OFF.
Note: if the burner does not light within 15 seconds, turn the control knob off and wait at least
one minute before trying again.
To switch the burner off, turn the knob clockwise until you hear the safety click.
After use, always turn the knobs to the off position.
Flame failure safety feature
The flame failure probe cuts off the gas supply to the burner if the flame is blown out.
When lighting the burner on flame failure models, hold down the knob for approximately 10
seconds after the burner has lit. Releasing the knob too soon will extinguish the flame.
If the flames are accidentally extinguished, turn off the burner and do not try to light it again for
at least one minute (to allow the gas to disperse).
Using the dual gas burners
The dual burner is a very flexible burner. It
has one inner and two outer crowns. The
inner crown can be controlled separately from
the flames of the outer crowns.
.
Fig. 13 Dual crown burners
Loading ...
Loading ...
Loading ...