Loading ...
Loading ...
Loading ...
TRANSITION INSTALLATION AND REMOVAL
1. The liner is shipped with the back-panel and the transition attached.
2. The transition is shipped upside-down in the liner and must be removed then, re-installed.
3. If an in-hood fan is furnished, the transition is shipped separately.
4. Detach the transition from the back-panel by removing four (4) screws. The shipping screws will be needed for
re-installing the transition to the back-panel.
5. Secure the transition to the top of the back panel using the four (4) screws that were removed. Use duct tape to
seal the joints of the transition and the top of the removable back panel. (See Figure 2 on page 5)
20
Loading ...
Loading ...
Loading ...