Loading ...
Loading ...
Loading ...
Installation
43
Integrating and connecting the
drawer
Check that the air filter is fitted and
the safety screws have been removed
from the back of the drawer (see
“Preparing the drawer”).
Connect the line power connection
cord to the drawer.
Slide the closed drawer into the
housing unit. When doing so make
sure that the line power cord does
not get trapped or damaged.
Align the drawer at right angles.
Open the drawer and secure it to the
right and left-hand side walls of the
housing unit with the 2wood screws
supplied ¹/₈" x 1" (3.5 x 25 mm).
Remove the 4 foam adhesive labels
from the back of the front panel on
the right and left-hand sides.
Connect the drawer to the line power
supply.
When the drawer is first connected, or
after an interruption of the power sup-
ply, all of the sensors and indicators in
the display will light up for approx.
10seconds for testing (initialization).
As soon as they go out, the drawer is
ready for use.
Integrate the combination appliance
in accordance with the operating and
installation instructions supplied with
it.
Loading ...
Loading ...
Loading ...