Loading ...
Loading ...
Loading ...
Operation
22
After the vacuuming process
An acoustic tone will sound.
Open the glass lid.
Danger of burning!
The sealing bar and weld seam are
hot.
Do not touch the sealing bar or the
weld seam immediately after the vac-
uuming process.
Remove the vacuum-sealing bag
from the vacuum chamber.
Before starting a new vacuuming
process, check that the vacuum
chamber and the sealing bar are
clean and dry.
Remove any soiling or liquid residues
if necessary.
Sealing the bag early
You can end the vacuuming process
before reaching the selected vacuuming
level and seal the bag early.
Touch the sensor.
The vacuuming process stops. After a
few seconds, the bag will be sealed.
It is only possible to seal the bag suc-
cessfully when there is a minimum
vacuum (vacuum level 1) in the cham-
ber.
Touch the sensor again if the re-
quired vacuum level has not yet been
reached. For technical reasons, a few
seconds will elapse before the bag is
sealed.
Loading ...
Loading ...
Loading ...