Loading ...
Loading ...
Loading ...
Operation
24
Place the lid on the container and
press it down.
Open the drawer and the glass lid.
Place vacuum adapter over the
vacuum pump air intake valve.
Attach the connector to the con-
tainer lid. Make sure that the closure
of the lid is turned to “seal” (closed).
Switch the drawer on with the sen-
sor.
The and sensors will light up.
Touch the sensor.
The and sensors go out. The
and sensors light up.
Touch the sensor repeatedly until
the segment for the required vacuum
level lights up.
Touch the sensor.
The vacuuming process will start.
Leave the glass lid open for the en-
tire duration of the vacuuming
process.
If an excessive amount of bubbles
form, you can cancel the vacuuming
process by pressing the sensor
(see “Canceling a vacuuming
process”).
After the vacuuming process
An acoustic tone will sound.
Detach the connector from the con-
tainer lid. Make sure that the closure
of the lid is still turned to
“seal” (closed).
Remove the vacuum adapter from the
vacuum pump air intake valve.
Before starting a new vacuuming
process, check that the vacuum
adapter, the tube, and the vacuum
chamber are clean and dry.
Remove any soiling or liquid residues
if necessary.
Loading ...
Loading ...
Loading ...