Loading ...
Loading ...
Loading ...
75
Troubleshooting
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Program
Invalid terminal repeat value
entered.
The value entered is out of the
range.
The acceptable range is between
the minimum of 0.2 inch to the
maximum of 40 inches.
Error - “Cannot Fit” Font size and settings too large for
label.
• Change the font size to a smaller
font. (Refer to page 37.)
• Delete some text.
(See page 37 for more
information.)
Error - “Cannot Fit” There are too many lines of text.
The maximum number of lines
allowed is four.
A blank line is considered another
line of text. DO NOT press ENTER
at the end of a line if you DO NOT
want another line. (See page 35.)
Error - “Cannot Fit” Wrong label type or orientation • Select a different label type (e.g.,
banner landscape). (See
page 55.)
• Change orientation (vertical or
horizontal). (See page 48.)
Left and right justification not
working.
The BMP21-PLUS/
BMP21-LAB
printer currently does not support
left or right justification. All label
text will be center justified only.
No action required.
Text not centered on label. Possible blank spaces added to text. Press Clear , then
re-enter text.
A large section of blank label prints
after text.
Possible blank lines added after
text.
Press Clear , then
re-enter text.
Cannot change location of the
human readable text in a barcode.
The human readable text is
automatically added below the
label. This position is fixed and
cannot be changed.
No action required.
Problem Cause Corrective Action
Loading ...
Loading ...
Loading ...