Home
Bookmarks
Home
Brady
Brady BMP21-PLUS User Manual
Page 2
Brady BMP21-PLUS Printer
User Manual - Page 2
For BMP21-PLUS.
PDF File Manual
,
92 pages
,
Read Online
|
Download pdf file
Copyright
Trademarks
UNITED STATES
INDUSTRY CANADA
EUROPE
1. Turn the printer over, open the battery compartment door, and remove the battery pack.
2. Dispose of in accordance with local regulations.
1. Disassemble printer and locate the lithium cell battery located on the main circuit board.
2. Remove the battery from the board, and dispose in accordance with local regulations.
Turkey
Mexico
BRADY Warranty
Technical Support
Technical Support Numbers/On-line Help
Repair and Replacement Parts
Introduction
Unpack Your Printer
BMP®21-PLUS/BMP®21-LAB Label Printer System Specifications
Physical and Environmental Characteristics
External View
Power Source
Loading AA Alkaline Batteries
Loading the Lithium Ion Battery Pack
AC Power Adapter
Media Cartridge
Changing the Label Cartridge
Recycling the Label Cartridge
1. Using the flathead screwdriver, pry off the chip (smart cell) on the bottom of the cartridge by placing the screwdriver blade under a corner of the chip and lifting up.
2. Starting at the narrow end of the cartridge, insert the flathead screwdriver into the seam of the cartridge, then twist the screwdriver slightly to loosen the two outside pieces of molding.
3. Repeat at various points on the seam until you can separate the top of the molding from the base.
4. Turn the base of the cartridge upside down and shake gently. Most of the components will fall out of the cartridge. If not, unhook and pull the components away from the molding.
5. Pull up on any unused media (labels) to remove it from the cartridge molding.
6. Unwind and detach the ribbon from its spools.
Power On
Editing Screen
Keypad
Navigation and Editing Keys
Function Keys
Menus
1. Press MENU .
2. Press the up/down navigation keys to highlight the menu items.
3. Press Enter to select the menu item.
4. Press Backspace .
Data Fields
1. Using navigation keys, navigate to the data field.
2. Enter data using the keyboard. OR Use the left/right navigation keys to toggle through a series of predesigned values.
3. Use navigation keys to move off the field after entering data.
4. To accept data entered, press Enter .
Cancel a Menu or Data Field
1. Press Backspace .
Printer Defaults
1. Press MENU .
2. Using navigation keys, choose Language.
4. Using navigation keys, choose the desired language, then press Enter .
1. Press MENU .
2. Navigate to Set Clock, then press Enter .
3. Navigate to Clock Format, then press Enter .
4. Select the desired format, then press ENTER .
1. Press MENU .
2. Navigate to Set Clock, then press Enter .
3. Navigate to Date Format, then press Enter .
4. Select the desired format, then press Enter .
1. Press MENU .
2. Navigate to Set Clock, then press Enter .
3. Navigate to Time Format, then press Enter .
4. Select the desired format, then press Enter .
1. Press MENU .
2. Navigate to Set Clock, then press Enter .
3. Navigate to Date, then press Enter .
4. Navigate to various fields to set the desired month, day, and year for the time you want displayed on your labels.
5. Enter the date from the keyboard OR use the left/right navigation key to decrease or increase the date, one month, day, or year at a time. (The left navigation key decreases the number, the right navigation key increases the number.)
6. When finished setting the date, press Enter .
1. Press MENU .
2. Navigate to Set Clock, then press Enter .
3. Navigate to Time, then press Enter .
4. Navigate to various fields to set the hour and/or minutes of the desired time.
5. Enter the time from the keyboard OR use the left/right navigation key to decrease or increase the time, one hour or minute at a time. (The left navigation key decreases the time, the right navigation key increases the time.)
6. When finished setting the time, press Enter .
Units
1. Press MENU .
2. Navigate to Units, then press Enter .
3. Navigate to the desired units of measure, then press Enter .
Cut Mode
1. Press MENU .
2. Navigate to Cut Mode, then press Enter .
3. Navigate to the desired cut mode, then press Enter .
Set Zero Style
1. Press MENU .
2. Navigate to Set Zero Style, then press Enter .
3. Navigate to the desired zero style, then press Enter .
Backlight Time
1. Press MENU .
2. Navigate to Backlight Time, then press Enter .
3. Navigate to the desired backlight options, then press Enter .
Getting Started
Entering Text
Editing Text
1. Press CLEAR .
1. Press FONT SIZE .
2. Navigate to the desired font size and weight, then press Enter .
2. Navigate to Auto, then press Enter .
Printing a Label
2. Squeeze the cutter levers to cut the label.
3. Gently pull the label away from the label exit chute.
1. Press MULTI-PRINT .
2. In the Copies: field, enter a numeric value for the number of copies desired OR use left/ right navigation keys to decrease or increase the number of copies.
3. When ready, press Enter .
Formatting
Symbols
1. Position the cursor at the point where you want the symbol to display.
3. Navigate to the desired symbol category, then press Enter .
4. Using navigation keys, select the desired symbol, then press Enter .
1. Press MENU .
2. Navigate to Symbols, then press Enter .
3. Navigate to the desired symbol category, then press Enter .
4. Using navigation keys, select the desired symbol, then press Enter .
1. Position the cursor to the right of the symbol.
International Character Set
1. Position the cursor where you want the international character to display.
2. Press International key . OR Press MENU . Navigate to International, then press Enter
3. Navigate to the desired international character, then press Enter .
Date and Time
1. Position the cursor on the label where you want the date and/or time to be inserted.
2. Press ADD DATE to display the date.
3. Press ADD TIME to display the time.
1. Place the cursor at the position on the label where you want to stamp the date or time.
2. Press MENU .
3. Navigate to Timestamp, then press Enter .
4. Navigate to Insert Time or Insert Date, then press Enter .
Barcode
1. Position the cursor where you want to add the barcode.
3. Choose the barcode symbology (39 or 128) and press Enter .
4. Enter the barcode data.
5. Press the right navigation key to move off the barcode.
1. Press the right navigation key to move off the barcode.
2. Enter the data. (Be sure to press Space before entering more data if you want to separate the data from the barcode.)
1. Using the left or right navigation keys, position the cursor in the barcode text.
2. If you are deleting barcode data, be sure to position the cursor to the right of the character you want to delete, then press Backspace .
3. If you are inserting additional data, position the cursor in the barcode data where new data will be entered, then enter the data.
4. To exit the barcode data, use the left or right navigation keys to move off the barcode data.
Serialization
How Serialization Works
Examples of Serialization
Add Serialization
1. Position the cursor on the label where you want the serialization to display.
3. With the cursor immediately displayed in the Start: field, enter the start value of the sequence.
4. In the Increment field, enter the increment value.
5. In the End: field, enter the end value of the sequence.
Edit a Sequence
1. Press SERIAL .
2. Navigate to the value fields to change and enter the new value.
File Management
File Naming Standards
Save a File
1. Press MENU .
3. Navigate to Save, then press Enter .
4. Navigate to an open numbered field (blank field) and press Enter .
5. In the File Name? field, enter a name for the file, then press Enter .
6. Press CLEAR .
Replace (Overwrite) a File
1. Press MENU .
3. Navigate to Save, then press Enter .
4. Navigate to the numbered field containing the file you want to overwrite and press Enter .
5. Navigate to Yes, then press Enter .
6. In the File Name? field, enter a name for the file, then press Enter .
Open a File
1. Press MENU .
3. Navigate to Open, then press Enter .
4. Navigate to the file to open, then press Enter .
Delete a File
1. Press MENU .
3. Navigate to Delete, then press Enter .
4. Navigate to the file to delete, then press Enter .
Label Types
Selecting a Label Type
1. Press LABEL TYPE .
2. Using navigation keys, choose the desired Label Type, then press Enter .
3. Navigate to the different data fields and enter the data requested.
Banner Portrait Label Type
1. Press LABEL TYPE .
2. Using navigation keys, choose Banner Portrait, then press Enter .
3. Using navigation keys, choose Horizontal or Vertical text, then press Enter .
Banner Landscape Label Type
1. Press LABEL TYPE .
2. Using navigation keys, choose Banner Landscape, then press Enter .
3. Using navigation keys, choose Horizontal Text or Vertical Text, then press Enter .
4. On the Editing screen, enter the text string.
Fixed Length
1. Press LABEL TYPE .
2. Navigate to Fixed Length, and press Enter .
3. Navigate to the desired length, and press Enter .
Vial
1. Press LABEL TYPE .
2. Navigate to Vial, then press Enter .
3. Navigate to the desired vial size, then press Enter .
4. Select the way you want the data to print on the label - landscape (horizontal) or portrait (vertical), then press Enter .
5. Enter the data to display on the vial label.
WireMarker Label Type (BMP®21-PLUS only)
1. Press LABEL TYPE .
2. Using navigation keys, choose WireMarker, then press Enter .
3. Navigate to the appropriate label size to fit the intended wire, then press Enter .
4. Enter the data you want repeated down the length of the label.
Terminal Block, Patch Panel (BMP®21-PLUS only)
1. Press LABEL TYPE.
2. Navigate to the desired label type and press Enter .
1. In the Spacing: field, enter the amount of space that exists between the terminals or ports.
2. Navigate to the Serial: field, then use the left or right navigation key to turn serialization ON or OFF.
3. Navigate to the # of Terminations: (or # of Ports:) field and enter the number of terminals or ports needed.
4. Navigate to the Rotation: field (not visible on the initial data fields screen), and determine if you want the label data to print out at 0° rotation (landscape) or print vertically at 90° rotation (portrait). Use the left or right navigation ke...
5. When finished, press Enter .
6. With the cursor displayed in the Start: field, enter the start value of the sequence.
7. In the Increment field, enter the increment value.
8. In the End: field, enter the end value of the sequence.
10. Press Backspace .
11. Press Enter .
12. Press Backspace again.
13. Use the up and down navigation keys to navigate to the first numbered data field and enter the identifying information for that terminal.
14. When on a terminal number, use the left or right navigation key to toggle to another terminal number.
Flags (BMP®21-PLUS only)
1. Press LABEL TYPE .
2. Navigate to Flag and press Enter .
3. In the Flag Length: field, enter the total length of the flag (as it exists before being wrapped around a wire or cable).
4. In the Cable Diameter: field, enter the diameter measurement of the cable to which the flag will be applied.
5. In the Style: field, use the left or right navigation key to display the eight different flag rotations.
7. Using the up/down navigation keys, navigate from the line number to the area number listed on the top right of the editing screen.
8. On the area number, use the left/right navigation keys to toggle between Area 01 and Area 02.
9. When on the desired area, use the down navigation key to move to the line number in that area and enter the text to display in that area of the flag.
Breaker Box (BMP®21-PLUS only)
1. Press LABEL TYPE .
2. Navigate to Breaker Box, then press Enter .
3. In the Spacing: field, enter the width of a standard breaker.
4. In the # of Breakers: field, enter the number of breakers to be labeled. This produces one continuous strip, vertically aligned for US breaker boxes, or horizontally aligned for EU breaker boxes.
5. In the Partition: field, use the left or right navigation keys to turn the partition on or off.
6. In the Rotation: field (not visible on the initial data fields screen), use the left or right navigation keys to access the degree of rotation desired for the printed labels - landscape (0°) or protrait (90°).
7. When finished, press Enter .
8. Using the up and down navigation keys, navigate to the breaker number.
9. When on the breaker number, use the left or right navigation keys to toggle to another breaker number.
10. Navigate to the Poles: number (directly under the breaker number) and enter the number of poles for that breaker. (You can also use the navigation keys to toggle to different numbers.)
11. Navigate to the first numbered data field and enter the identifying information for that breaker.
12. Repeat Steps 7 through 10 for each breaker.
Technical Support Numbers/On-line Help
Troubleshooting
3. Reprint the label(s).
2. Reprint your label.
Cleaning the Printer
1. Lightly moisten a soft (non-scratching) cloth with isopropyl alcohol. OR Use pre-moistened static-free cloths available with the Brady PCK-6 Cleaning Kit.
2. Gently wipe the display screen until clean.
1. Turn the printer off.
2. Open the printer cover and remove any cartridge currently in the printer.
3. Using a lint-free swab moistened with isopropyl alcohol (or a swab from the Brady PCK- 6 Cleaning Kit), gently swab the print head.
4. With the same moistened swab, gently brush the platen roller.
Appendix A - Symbols
Page 2/92
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 49
Page 50
Page 51
Page 52
Page 53
Page 54
Page 55
Page 56
Page 57
Page 58
Page 59
Page 60
Page 61
Page 62
Page 63
Page 64
Page 65
Page 66
Page 67
Page 68
Page 69
Page 70
Page 71
Page 72
Page 73
Page 74
Page 75
Page 76
Page 77
Page 78
Page 79
Page 80
Page 81
Page 82
Page 83
Page 84
Page 85
Page 86
Page 87
Page 88
Page 89
Page 90
Page 91
Page 92
Contents
Table of Contents
Search
Previous
Next
Troubleshooting
Bookmarks
Loading ...
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 58547997_bmp21-plus.pdf
File size: 2.63 MB
File Language: English
Pages: 92
Author: Brady
File created: 2015-07-25
Published: 2021-05-19
Updated: 2023-07-13
Verified by
Shany D'Amore
on 2023-07-13
Download File
Table of Contents
×
Copyright
3
Trademarks
3
UNITED STATES
4
INDUSTRY CANADA
4
EUROPE
5
1. Turn the printer over, open the battery compartment door, and remove the battery pack.
5
2. Dispose of in accordance with local regulations.
5
1. Disassemble printer and locate the lithium cell battery located on the main circuit board.
5
2. Remove the battery from the board, and dispose in accordance with local regulations.
5
Turkey
6
Mexico
6
BRADY Warranty
7
Technical Support
8
Technical Support Numbers/On-line Help
8
Repair and Replacement Parts
8
Introduction
13
Unpack Your Printer
14
BMP®21-PLUS/BMP®21-LAB Label Printer System Specifications
15
Physical and Environmental Characteristics
15
External View
17
Power Source
18
Loading AA Alkaline Batteries
20
Loading the Lithium Ion Battery Pack
21
AC Power Adapter
23
Media Cartridge
25
Changing the Label Cartridge
26
Recycling the Label Cartridge
27
1. Using the flathead screwdriver, pry off the chip (smart cell) on the bottom of the cartridge by placing the screwdriver blade under a corner of the chip and lifting up.
27
2. Starting at the narrow end of the cartridge, insert the flathead screwdriver into the seam of the cartridge, then twist the screwdriver slightly to loosen the two outside pieces of molding.
28
3. Repeat at various points on the seam until you can separate the top of the molding from the base.
28
4. Turn the base of the cartridge upside down and shake gently. Most of the components will fall out of the cartridge. If not, unhook and pull the components away from the molding.
28
5. Pull up on any unused media (labels) to remove it from the cartridge molding.
28
6. Unwind and detach the ribbon from its spools.
28
Power On
30
Editing Screen
31
Keypad
32
Navigation and Editing Keys
32
Function Keys
34
Menus
35
1. Press MENU .
35
2. Press the up/down navigation keys to highlight the menu items.
35
3. Press Enter to select the menu item.
35
4. Press Backspace .
35
Data Fields
36
1. Using navigation keys, navigate to the data field.
36
2. Enter data using the keyboard. OR Use the left/right navigation keys to toggle through a series of predesigned values.
36
3. Use navigation keys to move off the field after entering data.
36
4. To accept data entered, press Enter .
36
Cancel a Menu or Data Field
36
1. Press Backspace .
36
Printer Defaults
37
1. Press MENU .
38
2. Using navigation keys, choose Language.
38
4. Using navigation keys, choose the desired language, then press Enter .
38
1. Press MENU .
39
2. Navigate to Set Clock, then press Enter .
39
3. Navigate to Clock Format, then press Enter .
39
4. Select the desired format, then press ENTER .
39
1. Press MENU .
40
2. Navigate to Set Clock, then press Enter .
40
3. Navigate to Date Format, then press Enter .
40
4. Select the desired format, then press Enter .
40
1. Press MENU .
40
2. Navigate to Set Clock, then press Enter .
40
3. Navigate to Time Format, then press Enter .
40
4. Select the desired format, then press Enter .
40
1. Press MENU .
41
2. Navigate to Set Clock, then press Enter .
41
3. Navigate to Date, then press Enter .
41
4. Navigate to various fields to set the desired month, day, and year for the time you want displayed on your labels.
41
5. Enter the date from the keyboard OR use the left/right navigation key to decrease or increase the date, one month, day, or year at a time. (The left navigation key decreases the number, the right navigation key increases the number.)
41
6. When finished setting the date, press Enter .
41
1. Press MENU .
42
2. Navigate to Set Clock, then press Enter .
42
3. Navigate to Time, then press Enter .
42
4. Navigate to various fields to set the hour and/or minutes of the desired time.
42
5. Enter the time from the keyboard OR use the left/right navigation key to decrease or increase the time, one hour or minute at a time. (The left navigation key decreases the time, the right navigation key increases the time.)
42
6. When finished setting the time, press Enter .
42
Units
43
1. Press MENU .
43
2. Navigate to Units, then press Enter .
43
3. Navigate to the desired units of measure, then press Enter .
43
Cut Mode
44
1. Press MENU .
44
2. Navigate to Cut Mode, then press Enter .
44
3. Navigate to the desired cut mode, then press Enter .
44
Set Zero Style
45
1. Press MENU .
45
2. Navigate to Set Zero Style, then press Enter .
45
3. Navigate to the desired zero style, then press Enter .
45
Backlight Time
46
1. Press MENU .
46
2. Navigate to Backlight Time, then press Enter .
46
3. Navigate to the desired backlight options, then press Enter .
46
Getting Started
47
Entering Text
47
Editing Text
47
1. Press CLEAR .
48
1. Press FONT SIZE .
49
2. Navigate to the desired font size and weight, then press Enter .
49
2. Navigate to Auto, then press Enter .
50
Printing a Label
51
2. Squeeze the cutter levers to cut the label.
51
3. Gently pull the label away from the label exit chute.
51
1. Press MULTI-PRINT .
51
2. In the Copies: field, enter a numeric value for the number of copies desired OR use left/ right navigation keys to decrease or increase the number of copies.
51
3. When ready, press Enter .
51
Formatting
53
Symbols
53
1. Position the cursor at the point where you want the symbol to display.
53
3. Navigate to the desired symbol category, then press Enter .
53
4. Using navigation keys, select the desired symbol, then press Enter .
53
1. Press MENU .
54
2. Navigate to Symbols, then press Enter .
54
3. Navigate to the desired symbol category, then press Enter .
54
4. Using navigation keys, select the desired symbol, then press Enter .
54
1. Position the cursor to the right of the symbol.
54
International Character Set
55
1. Position the cursor where you want the international character to display.
55
2. Press International key . OR Press MENU . Navigate to International, then press Enter
55
3. Navigate to the desired international character, then press Enter .
55
Date and Time
56
1. Position the cursor on the label where you want the date and/or time to be inserted.
56
2. Press ADD DATE to display the date.
56
3. Press ADD TIME to display the time.
56
1. Place the cursor at the position on the label where you want to stamp the date or time.
56
2. Press MENU .
56
3. Navigate to Timestamp, then press Enter .
56
4. Navigate to Insert Time or Insert Date, then press Enter .
56
Barcode
57
1. Position the cursor where you want to add the barcode.
57
3. Choose the barcode symbology (39 or 128) and press Enter .
57
4. Enter the barcode data.
57
5. Press the right navigation key to move off the barcode.
57
1. Press the right navigation key to move off the barcode.
58
2. Enter the data. (Be sure to press Space before entering more data if you want to separate the data from the barcode.)
58
1. Using the left or right navigation keys, position the cursor in the barcode text.
58
2. If you are deleting barcode data, be sure to position the cursor to the right of the character you want to delete, then press Backspace .
58
3. If you are inserting additional data, position the cursor in the barcode data where new data will be entered, then enter the data.
58
4. To exit the barcode data, use the left or right navigation keys to move off the barcode data.
58
Serialization
59
How Serialization Works
59
Examples of Serialization
60
Add Serialization
62
1. Position the cursor on the label where you want the serialization to display.
62
3. With the cursor immediately displayed in the Start: field, enter the start value of the sequence.
62
4. In the Increment field, enter the increment value.
62
5. In the End: field, enter the end value of the sequence.
62
Edit a Sequence
62
1. Press SERIAL .
62
2. Navigate to the value fields to change and enter the new value.
62
File Management
63
File Naming Standards
63
Save a File
63
1. Press MENU .
63
3. Navigate to Save, then press Enter .
63
4. Navigate to an open numbered field (blank field) and press Enter .
63
5. In the File Name? field, enter a name for the file, then press Enter .
64
6. Press CLEAR .
64
Replace (Overwrite) a File
64
1. Press MENU .
64
3. Navigate to Save, then press Enter .
64
4. Navigate to the numbered field containing the file you want to overwrite and press Enter .
64
5. Navigate to Yes, then press Enter .
65
6. In the File Name? field, enter a name for the file, then press Enter .
65
Open a File
65
1. Press MENU .
65
3. Navigate to Open, then press Enter .
65
4. Navigate to the file to open, then press Enter .
65
Delete a File
66
1. Press MENU .
66
3. Navigate to Delete, then press Enter .
66
4. Navigate to the file to delete, then press Enter .
66
Label Types
67
Selecting a Label Type
67
1. Press LABEL TYPE .
67
2. Using navigation keys, choose the desired Label Type, then press Enter .
67
3. Navigate to the different data fields and enter the data requested.
67
Banner Portrait Label Type
68
1. Press LABEL TYPE .
68
2. Using navigation keys, choose Banner Portrait, then press Enter .
68
3. Using navigation keys, choose Horizontal or Vertical text, then press Enter .
68
Banner Landscape Label Type
69
1. Press LABEL TYPE .
69
2. Using navigation keys, choose Banner Landscape, then press Enter .
69
3. Using navigation keys, choose Horizontal Text or Vertical Text, then press Enter .
69
4. On the Editing screen, enter the text string.
69
Fixed Length
70
1. Press LABEL TYPE .
70
2. Navigate to Fixed Length, and press Enter .
70
3. Navigate to the desired length, and press Enter .
70
Vial
71
1. Press LABEL TYPE .
71
2. Navigate to Vial, then press Enter .
71
3. Navigate to the desired vial size, then press Enter .
71
4. Select the way you want the data to print on the label - landscape (horizontal) or portrait (vertical), then press Enter .
71
5. Enter the data to display on the vial label.
71
WireMarker Label Type (BMP®21-PLUS only)
72
1. Press LABEL TYPE .
72
2. Using navigation keys, choose WireMarker, then press Enter .
72
3. Navigate to the appropriate label size to fit the intended wire, then press Enter .
72
4. Enter the data you want repeated down the length of the label.
72
Terminal Block, Patch Panel (BMP®21-PLUS only)
74
1. Press LABEL TYPE.
74
2. Navigate to the desired label type and press Enter .
74
1. In the Spacing: field, enter the amount of space that exists between the terminals or ports.
74
2. Navigate to the Serial: field, then use the left or right navigation key to turn serialization ON or OFF.
74
3. Navigate to the # of Terminations: (or # of Ports:) field and enter the number of terminals or ports needed.
75
4. Navigate to the Rotation: field (not visible on the initial data fields screen), and determine if you want the label data to print out at 0° rotation (landscape) or print vertically at 90° rotation (portrait). Use the left or right navigation ke...
75
5. When finished, press Enter .
75
6. With the cursor displayed in the Start: field, enter the start value of the sequence.
75
7. In the Increment field, enter the increment value.
75
8. In the End: field, enter the end value of the sequence.
75
10. Press Backspace .
76
11. Press Enter .
76
12. Press Backspace again.
76
13. Use the up and down navigation keys to navigate to the first numbered data field and enter the identifying information for that terminal.
76
14. When on a terminal number, use the left or right navigation key to toggle to another terminal number.
76
Flags (BMP®21-PLUS only)
77
1. Press LABEL TYPE .
77
2. Navigate to Flag and press Enter .
77
3. In the Flag Length: field, enter the total length of the flag (as it exists before being wrapped around a wire or cable).
77
4. In the Cable Diameter: field, enter the diameter measurement of the cable to which the flag will be applied.
77
5. In the Style: field, use the left or right navigation key to display the eight different flag rotations.
78
7. Using the up/down navigation keys, navigate from the line number to the area number listed on the top right of the editing screen.
78
8. On the area number, use the left/right navigation keys to toggle between Area 01 and Area 02.
78
9. When on the desired area, use the down navigation key to move to the line number in that area and enter the text to display in that area of the flag.
78
Breaker Box (BMP®21-PLUS only)
79
1. Press LABEL TYPE .
79
2. Navigate to Breaker Box, then press Enter .
79
3. In the Spacing: field, enter the width of a standard breaker.
79
4. In the # of Breakers: field, enter the number of breakers to be labeled. This produces one continuous strip, vertically aligned for US breaker boxes, or horizontally aligned for EU breaker boxes.
79
5. In the Partition: field, use the left or right navigation keys to turn the partition on or off.
79
6. In the Rotation: field (not visible on the initial data fields screen), use the left or right navigation keys to access the degree of rotation desired for the printed labels - landscape (0°) or protrait (90°).
79
7. When finished, press Enter .
79
8. Using the up and down navigation keys, navigate to the breaker number.
80
9. When on the breaker number, use the left or right navigation keys to toggle to another breaker number.
80
10. Navigate to the Poles: number (directly under the breaker number) and enter the number of poles for that breaker. (You can also use the navigation keys to toggle to different numbers.)
80
11. Navigate to the first numbered data field and enter the identifying information for that breaker.
80
12. Repeat Steps 7 through 10 for each breaker.
80
Technical Support Numbers/On-line Help
81
Troubleshooting
82
3. Reprint the label(s).
84
2. Reprint your label.
85
Cleaning the Printer
89
1. Lightly moisten a soft (non-scratching) cloth with isopropyl alcohol. OR Use pre-moistened static-free cloths available with the Brady PCK-6 Cleaning Kit.
89
2. Gently wipe the display screen until clean.
89
1. Turn the printer off.
89
2. Open the printer cover and remove any cartridge currently in the printer.
89
3. Using a lint-free swab moistened with isopropyl alcohol (or a swab from the Brady PCK- 6 Cleaning Kit), gently swab the print head.
89
4. With the same moistened swab, gently brush the platen roller.
89
Appendix A - Symbols
91
Search:
×
Search
