Lifespan X22 X-22 Cross Trainer

User Manual - Page 19

For X22.

PDF File Manual, 32 pages, Read Online | Download pdf file

X22 photo
Loading ...
Loading ...
Loading ...
19
Operations:
Operations:
Users can exercise according to your desired Heart Rate program by setting your AGE, TIME, DISTANCE,
CALORIES or TARGET PULSE. In these programs, the computer will adjust the resistance level according
to the heart rate detected. For example, the resistance level may increase every 20 seconds while the
heart rate detected is lower than the TARGET H.R.C. Also the resistance level may decrease every 20
seconds while the heart rate detected is higher than the TARGET H.R.C.
1. Use UP/DOWN keys to select one of the heart rate control program from P18 to P22.
2. Press the ENTER key to enter your workout program.
3. The AGE will flash at P18 to P21 programs and you can press UP or DOWN keys to set
your AGE. The default age is 35.
4. At program 22, the TARGET PULSE will flash and you can press UP or DOWN keys to set your
TARGET PULSE between 80 to 180. The default TARGET PULSE is 120.
5. The TIME will flash and you can press UP or DOWN keys to set your exercise TIME.
Press ENTER key to confirm your desired TIME.
6. The DISTANCE will flash and you can press UP or DOWN keys to set your target DISTANCE.
Press ENTER key to confirm your desired DISTANCE.
7. The CALORIES will flash and you can press UP or DOWN keys to set your exercise CALORIES.
Press ENTER key to confirm your desired CALORIES.
8. Press the START/STOP key to begin exercise.
1. Use UP or DOWN key to select the WATT CONTROL (P23) program.
2. Press the ENTER key to enter your workout program.
3. The TIME will flash and you can press UP or DOWN key to set your exercise TIME.
Press ENTER key to confirm your desired TIME.
4. The DISTANCE will flash and you can press UP or DOWN key to set your target DISTANCE.
Press ENTER key to confirm your desired DISTANCE.
5. The WATT will flash and you can press UP or DOWN key to set your target WATT value.
Press ENTER key to confirm your target WATT. The default WATT value is 100.
WATT CONTROL PROGRAM: WATT CONTROL
Program 23 is a Speed Independent Program. Press ENTER key to set up the values of TARGET WATT,
TIME, DISTANCE and CALORIES. During the exercise mode, the level of resistance is not adjustable. For
example, the level of resistance may increase while the speed is too slow. Also the level of resistance
may decrease while the speed is too fast. As a result, the calculated value of WATT will close to the value
of TARGET WATT setup by users.
DISPLAY MANUAL |
Loading ...
Loading ...
Loading ...