Loading ...
Loading ...
Loading ...
Note
Water leaks may occur if you use the Underwater Housing while dirt, sea water, or other foreign objects are
adhered to the “1. waterproof packing”.
Before use, be sure to check that there is no dirt, sea water, or other foreign object adhered to the “1.
waterproof packing” and be sure to check that there are no water leaks by following the instructions in “How
to check for water leaks”.
[16] Getting Started
Using the Underwater Housing
How to check for water leaks
Before installing the camera, always close the Underwater Housing and immerse it in water to make
sure no water leaks in.
When finding a malfunction of Underwater Housing
If a malfunction is found by inspection of the waterproof packing or check for water leaks, stop using
the camera immediately and take it to the nearest Sony dealer.
[17] Getting Started
Using the Underwater Housing
Maintenance
After recording in a location with a sea breeze, wash the camera thoroughly in fresh water with
the buckle fastened to remove salt and sand, then wipe with a soft dry cloth. It is recommended
that you submerge the Underwater Housing in fresh water for about 30 minutes. If it is left with
salt on it, metal portions may be damaged or rust may form and cause water leakage.
If sun oil is on the Underwater Housing, be sure to wash it off thoroughly using lukewarm water.
Wipe the inside of the Underwater Housing with a soft dry cloth. Do not wash it with water.
Be sure to perform the above maintenance each time you use the Underwater Housing. Do not use
any type of solvent such as alcohol, benzine or thinner for cleaning, as this might damage the surface
finish of the Underwater Housing.
Loading ...
Loading ...
Loading ...