Loading ...
Loading ...
Loading ...
Remote Control Functions
7
SB35
Remote Control Functions
The following buttons are available in the SABRE SB35 remote control:
1. Power
2. HDMI Inputs 1/2/3
3. Optical, HDMI TV ARC, Aux in
4. Bluetooth
5. Volume control +/ –
6. Mute
7. Independent Subwoofer Volume control +/–
8. Harman Volume
9. Stereo, Virtual modes
10. Wave mode - Select room size
a. Small
b. Medium
c. Large
1
2
3
4
5
6
7
8
9
10
HDMI 1 HDMI 2
HDMI
TV
AUX IN
BASS
VOLUME
STEREO
WAVE
VIRTUAL
HARMAN
VOLUME
OPTICAL
HDMI 3
Power button:To bring the SABRE SB35 to Operational mode from Standby mode,
press the Power button (The Power indicator on the SABRE SB35 will turn white).
To put the system in the Standby mode, press the Power button while the system is
switched ON (The Power indicator on the SABRE SB35 will turn amber). If you do not
press the Power button, the SABRE SB35 and the subwoofer will automatically go into
Standby mode approximately in 10 minutes after the audio input signal stops.
HDMI inputs 1, 2 and 3: Press a button to select an active source – HDMI 1, HDMI 2
or HDMI 3.
Optical, HDMI ARC, AUX input: Press this button to select the desired source.
Bluetooth: Short press to switch to Bluetooth source. Press and hold to make the unit
go to pairing mode.
NOTE: SABRE SB35’s Bluetooth device name is SABRE SB35 and the password
is 0000.
Volume control +/–: Press the (–) button to reduce the volume; press the (+) button
to increase the volume.
Mute: Press this button to mute the system.
Subwoofer volume control +/–: Use this to control the subwoofer’s volume. Press
“+” to increase the subwoofer’s volume. Press “–” to decrease the subwoofer’s volume.
Harman Volume: This button cycles the Harman Volume function between high, low
and off. Harman volume is an advanced digital signal processing technology to control
playback volume. It evens out the volume level on everything you watch, improving
your listening experience. Once you choose the volume level, Harman Volume does the
rest. It helps you avoid volume increase from commercials, volume differences when
you change channels or switch sources. It helps you listen to the perfect sound of the
dialogs.
Stereo, Virtual, Wave mode: Press this button to change the surround sound to
Stereo, Virtual or WAVE mode. In WAVE mode you can press the WAVE button to adjust
the surround effect depending on your room size: Small, Medium or Large.
NOTE: Feel free to experiment with this adjustment to find the effect that
works best for your listening room and seating arrangement. As with
the Virtual mode, in the HARMAN WAVE mode, the soundbar’s digital
signal processing also creates rear ambience that adds depth to the sound
presentation for conventional stereo and MP3 sources.
Placing the SABRE SB35
The SABRE SB35 soundbar can be placed on a table and can be wall-mounted as well.
Placing the SABRE SB35 on a Table
If your TV is placed on a table, you can place the soundbar on the table directly in front
of the TV stand, centered with the TV screen. Use the table stand provided.
To place the soundbar on a table:
1. Place the rubber pad on the table stand provided.
2. Slide the soundbar into the table stand.
The soundbar will be placed on the table.
NOTE: The rubber pads should be placed in the soundbar at the factory
during manufacturing of the soundbar. If they are not present, check inside
the accessories box and place them before insertion.
Loading ...
Loading ...
Loading ...