Loading ...
Loading ...
Loading ...
Cleaning and care
49
Descaling warning
Descale soon will appear in the dis-
play the next time you switch the steam
ironing system on if there are only about
2hours of ironing available before the
system needs descaling.
You can start the descaling process
whilst the system is cold via the Set-
tings menu (see "Starting the descaling
process early") or you can press the
OKbutton to confirm the message in
the display and continue ironing as nor-
mal. The symbol will continue to
show in the display until descaling is
carried out.
After the remaining operating hours
have elapsed, the descaling process
must be carried out before the steam
ironing system can be used again.
The time to start the descaling
process can be set individually at any
time and started as required (see
"Starting the descaling process
early").
You can interrupt the descaling process
by switching the steam ironing system
off and pressing the button. When
you turn the system back on, descaling
will start again from the point where the
process was interrupted.
The messages in the display will guide
you through the descaling process. The
entire descaling process takes approx.
90minutes.
Follow the required procedures when
prompted by the messages in the dis-
play. After starting the descaling
process, you must be present after ap-
prox. 20minutes and subsequently af-
ter an additional 60minutes. During the
remaining time, the steam ironing sys-
tem can be left unattended.
Tip: To optimize the descaling process,
start the procedure while the system is
still cold after switching on the steam
ironing system on. This way, you avoid
a delay of up to 3hours that may be
caused by the cool-down phase.
Loading ...
Loading ...
Loading ...