Loading ...
Loading ...
Loading ...
Good Tips
• Freshly ground coffee is key to making better coffee. OXO recommends grinding
coffee immediately before brewing.
• If you don’t grind regularly, make sure to clear the ground coffee from the chute
before each use, as some older coffee dust may be sitting inside your Grinder and will
affect the quality of your next batch. Without adding beans to the hopper, select 1 cup
and grind. Discard the grounds. You are now to ready to grind your fresh beans.
• Coffee avor and strength is a personal preference. Vary the type of coffee beans,
amount of coffee and neness of grind to achieve the avor you prefer.
• Do not store beans in the bean hopper for an extended period of time.
• A grind size that is too ne can cause lters/brew baskets to clog and/or overow.
If you experience this, try a coarser grind size.
• Use fresh beans. Old/dry beans will create static. Excess static can lead to dust
sticking to walls of Grinder.
Cleaning, Care and Storage
Before cleaning, OXO recommends running the Grinder for 10 seconds with an empty
bean hopper to help clear beans/grounds from the burrs and grounds chute.
1. Always unplug power cord from power outlet before cleaning.
2. Unlock and remove bean hopper from Grinder by pressing down on hopper release
lever and twisting hopper counter-clockwise. See pg. 14 for full instructions.
3. Carefully remove any beans from between Grinder burrs.
4. Lift metal burr handle, and twist counter-clockwise. Pull
handle straight up to remove upper burr.
5. Clean upper burr, lower burr and grounds chute with a small
bristle brush.
6. Align indents in upper burr with tabs inside lower burr. Push
upper burr straight into grinder and turn handle clockwise,
until you hear a “click.”
Note: Continue pressing down while turning handle to ensure upper burr engages with lower burr.
7. To test proper burr installment, pull metal burr handle straight up. If properly
installed, burr will stay in place.
8. Wash the ground coffee container, bean hopper and both lids in warm water and
mild detergent, rinse and dry thoroughly.
9. Wash and dry stainless steel plate and wipe free any coffee grounds sitting under
plate.
10. Replace bean hopper by aligning
icon with arrow, then gently seat hopper
straight down
.
11. Wipe Grinder exterior with a soft, damp cloth.
Note: Do not use abrasive pads or harsh chemicals to clean Grinder. Do not wash any part of your Grinder in the dishwasher.
SHOCK HAZARD
ONLY FOR USE WITH 110V AC OUTLET.
DO NOT USE ADAPTER.
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN
RESULT IN DEATH, FIRE OR ELECTRICAL SHOCK.
WARNING!
ELECTRICAL SHOCK HAZARD:
NEVER IMMERSE THIS APPLIANCE, POWER CORD OR
POWER PLUG IN WATER OR ANY OTHER LIQUID. DOING
SO CAN RESULT IN DEATH OR ELECTICAL SHOCK.
WARNING!
1615
Loading ...
Loading ...
Loading ...