Loading ...
Loading ...
Loading ...
Instructions
32
• Do not place materials or substances
that could melt or catch fire (paper,
plastic or aluminium foil) on the
appliance while it is in use.
• Place the cookware directly on the
glass ceramic surface.
• Do not put empty pans or frying pans
on switched on cooking zones.
• Do not use rough or abrasive
materials or sharp metal scrapers.
• Do not use cleaning products containing
chlorine, ammonia or bleach on parts
made of steel or that have metallic
surface finishes (e.g. anodizing, nickel-
or chromium-plating).
Installation
• THIS APPLIANCE MUST NOT BE
INSTALLED IN BOATS OR
CARAVANS.
• Position the appliance into the
cabinet cut-out with the help of a
second person.
• Check that the carcase material is
heat resistant.
• Check that the carcase has the
required openings.
• To avoid potential overheating,
the appliance must not be
installed behind a decorative
door or a panel.
• Have the electrical connection
performed by authorised
technical personnel.
• The appliance must be connected
to earth in compliance with
electrical system safety standards.
• Use cables withstanding a
temperature of at least 90°C.
• The tightening torque of the
screws of the terminal supply
wires must be 1.2 - 1.5 Nm.
• The power cable must only be
installed or replaced by a
qualified technician.
For this appliance
• If cracks or fissures form, or if the glass
ceramic cooking surface breaks, turn
off the appliance immediately.
Disconnect the power supply and call
Technical Support.
• Avoid hard, solid objects falling on the
cooking surface.
• Do not use the hob if the pyrolytic
cycle is taking place inside any oven
installed below.
• Do not touch or clean the hob surface
during operation or when the residual
heat indicator lights are still on.
Loading ...
Loading ...
Loading ...