Loading ...
Loading ...
Loading ...
Installation
53
EN
5.6 Fixing brackets
There are two fastening options depending
on the configuration of the unit in which the
appliance will be installed:
1 Side holes.
2 Front and rear holes.
To fasten the hob:
1. Unscrew the screws from the holes
shown in the following figures, according
to the fastening option chosen.
2. Fasten the hob to the structure using the
screws that were removed by passing
them through the holes in the fixing
brackets (A).
The fixing brackets should be installed
differently according to the thickness of the
countertop.
Countertop thickness 30 mm:
Countertop thickness 40 mm:
Countertop thickness 50 mm:
If tightened too much the glass
may be strained and crack.
In the case of countertops of less
than 30 mm, an additional spacer
should be used between the
bracket and the top.
Loading ...