Loading ...
Loading ...
Loading ...
Installation
50
5.4 Section cut from the countertop
Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
Mounting dimensions (flush built-in model)
For this type of mounting, you have to make
an additional cut at the edges of the recess
in the furniture if you wish to install the hob
flush with the countertop.
After laying the adhesive seal (A) on the
glass surface and after positioning and
securing the hob, fill the edges with
insulating silicone (B) and wipe away any
excess.
In the event the hob needs to be removed,
cut the silicone using a cutter before
attempting to remove it (C).
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
A B C D E
min.
500
min.
460
min.
750
30 - 50
min.
50
L X Y G H
600 -
700
596 510 604 514
Loading ...
Loading ...
Loading ...