Hot
(black)
Neutral
(white)
Ground
(green)
USB
ports (2)
Indicator LED
PROTECTED
We recommend that you use a professional
electrician to install the USB charger wall outlet. For
information about electrical specications, see
SPECIFICATIONS.
SAFETY
Warnings:
• RISK OF ELECTRIC SHOCK — Use only in dry
locations and only indoors.
• All cables should be routed away from the
charger outlet openings.
• DO NOT use with any aquarium equipment.
• DO NOT install in an outlet that is not grounded.
Notes to the installer:
• This device must be installed in accordance with
National and Local electrical codes.
• To prevent severe shock or electrocution, always
turn power OFF at the service panel before
working with wiring.
• This device should be used with copper or
copper-clad wire. DO NOT use with aluminum wire.
• DO NOT plug this device into a shallow wall box.
The wall box must be deep enough to house the
charger outlet. If the box is too shallow, the
charger outlet will not t securely into the wall.
• This device is to be installed in a wall box
measuring at least 3.9 × 2.36 × 1.97 in.
(99 × 59.9 × 50 mm).
• Accommodate 14 AWG stranded bare copper leads.
• Use USB connectors with interconnecting cables.
• This device is not intended for supporting
products or appliances.
A single branch circuit shall supply the device.
PACKAGE CONTENTS
• 3.6A USB Charger Wall Outlet
• White decora-style wall plate
• Screws: 2 long and 2 short
• Quick Setup Guide
FEATURES
• Replaces a standard duplex outlet
• Premium surge protection protects your valuable
devices.
• Status LED lets you know your devices are
protected.
• Provides two USB ports with 3.6A total output
• Works in nearly all installations
• Compatible with your existing decora wall plate
Before using your new product, please read these instructions to prevent any damage.
INSTALLING THE CHARGER
1 Warning: DISCONNECT POWER. Failure to
do so can result in severe injury or death.
Make sure that you disconnect power to the
circuit by removing the fuse from the circuit
breaker or turning OFF the circuit breaker.
2 Remove the wall plate and mounting screws
that cover the old outlet.
3 Carefully remove the existing outlet from
the wall box.
4 Disconnect the wiring from the old outlet.
5 Connect the wires to the charger outlet:
• Black lead attaches to the hot wire
• White lead attaches to the neutral wire
• Green lead attaches to the ground wire
You can attach the wires by:
1 Inserting straight wires into the holes.
OR
2 Wrapping the wires 3/4 of the way around
the terminal screws, making sure that the
wires do not overlap.
3 Tighten every screw and make sure that no
bare copper wire is exposed. When
tightening screws, use 14 pounds-per-inch
of torque.
6 Carefully insert the charger outlet into the
wall box.
QUICK SETUP GUIDE
Surge
Protector
NSHW36AS18
Loading ...
