Loading ...
Loading ...
Loading ...
12
Installation of the Beer Keg
Position the beer keg directly in front of the open door. Using keg handles only, carefully lift the beer
keg. (See Figure 4)
To place the beer keg inside the cabinet, brace your knees behind the beer keg. Lift the front of the
keg just enough so the front edge of the keg is resting on the front edge of the Beer Dispenser bottom
cabinet. (See Figure 5)
Grasp the keg handles and slide it all the way into the cabinet.
Figure 4 Figure 5
Installation of CO
2
Air Line Hose through the Cabinet Wall
Remove plug located at the exterior back (top left hand corner).
Save it for later use if you decide to convert unit to an all
refrigerator.
Insert the open end of the air line (red) from the cabinet through
the uncovered hole. (See Figure 6)
Figure 6
Installation of CO
2
Air Line Hose to Regulator
Attach the open end of the red hose provided to the hose barb
connection on the regulator.
Secure hose by using the steel clamp provided. Use
pliers/screwdriver to tighten clamp and assure no leaks.
(See Figure 7)
Figure 7
Loading ...
Loading ...
Loading ...