Loading ...
2
Installation Instructions
STEP 1:
Prepare Installation Area by Removing the Front Cover from Zoneline Unit
(if applicable)
WARNING
5LVNRI(OHFWULFDO6KRFNFDQFDXVHLQMXU\RUGHDWK%HIRUHVHUYLFLQJVZLWFKSRZHURႇDW
the service panel and lock the area to prevent power from being switched on accidentally.
Note: Record all Aux Mode settings before beginning this project.
1. Remove power from unit and remove the Front cover.
9HULI\89&FRPSDWDELOLW\E\FRQ¿UPLQJWKH37$&PRGHOQXPEHUVHHH[DPSOHEHORZ
&RQ¿UP\RXKDYHWKHFRUUHFW89&NLWIRU\RXUYROWDJHDSSOLFDWLRQ5$.89&95$.89&9
STEP 2:
Remove Vent Grille from Zoneline Unit
1. Remove and retain the four 5/16” screws securing the air louver. Note orientation of louver for replacement.
2. Remove louver and set aside.
5HPRYHDQGUHWDLQWKHZHOGHGZLUHJULGIURPWKHDLUGHÀHFWRUXVLQJDVPDOOÀDWEODGHGVFUHZGULYHU
Nomenclature Example
AZ45E09DABW5
Engineering Revision - Must be 5 or higher
Loading ...
Loading ...
Loading ...